The consistency of plastering mortar can be determined by base materials. Selecting ordinary plastering mortar, we should also take its feasibility into consideration at the same time, including the water retention, cohesion, thixotropy, as well as the initial cracking resistance, bonding strength, compressive strength, the later cracking resistance and many other indicators. Emphasis should not be laid on one particular indicator to affect other properties of mortar. For instance, increasing the amount of cement to improve the mortar strength may result in shrinkage cracks of mortar in the later period; increasing the proportion of powdered materials to improve the water retention or operability of mortar may lead to plastic cracking of mortar; affecting the thixotropy of mortar to improve the water retention of mortar may result in difficulty for press polish of plaster; using a large amount of fly ash to reduce the cost may result in peeling of mortar; using the fine sand or adding the air-entraining agent may result in the low strength of mortar, thus peeling and cracking. Therefore, in the selection of ordinary plastering mortar, we should first conduct the small-area plastering operation on the entity of project and then finally determine the economically reasonable plastering mortar.
If you need any
PRODUCTION FORMULATIONS and PRODUCTION PROCESS
about
PRODUCTION FORMULATIONS and PRODUCTION PROCESS
about
CONSTRUCTION CHEMICALS
CONSTRUCTION CHEMICALS
FORMULATIONS
ENCYCLOPEDİA - 1
is enough.
Construction chemicals formulations encyclopedia - 1 contains tile and seramic adhesive formulations, production process ofcement based flexible tile and seramic adhesives, making rapid set and cement based tile and ceramic adhesive, grey and white tile and ceramic adhesive formulas, composition ofcement based marble and granite adhesive, manufacturing process of mortar grout ( joint filler ), cement based and polymer added joint fillerformulations, production of color mortar grouts,stamped concrete release powder production process, making stamped concrete colored hardener, formulation of thermal insulation coating plaster, cement based white and grey thermal insulating coating plaster manufacturing process, cement based waterproof coating plaster production process, cement based thermal insulating screed plaster composition, preparation of cement based heat insulation plate mortar, manufacturing process of cement based heat coating insulation plate adhesive mortar, formulations of satin plaster, making cement based and rapid set waterplug, formulations of cement based thick repair mortar,manufacturing process of black patching and reparing paste, making enjection mortar, formula ofkhorasan mortar, production process of hydraulic lime mortar, making gaseous concrete bonding ( adhesive ) mortar, composition and compound of cement based decorative plaster, formulations of plastic paint powder.
All construction chemicals in the encyclopedia are producible easily. You need no help and no technıcal support. The encyclopedia is enough to produce cement based adhesives, joint filler, plaster and mortar itself.
CONSTRUCTION CHEMICALS
FORMULATIONS
ENCYCLOPEDIA - 1
is written clear and understandable.
|
|
|
|
|
|
|