Use of plastering mortar should be determined by the facade dimensional precision and wall structure of buildings. For example, since the brick structure wall has many mortar joints between blocks and large dimensional deviation of blocks, ordinary plastering mortar is usually used. As for reinforced concrete structure, if the dimensional accuracy deviation of template is small, or the size of concrete wall panel and beam section is inconsistent, then ordinary plastering must be applied; however, if the dimensional accuracy deviation of base course is small, then thin-layer mortar plastering can be applied.
For instance, the overlay mortar of external thermal insulation EPS boards can only be thin-layer plastering mortar. If ordinary plastering mortar is applied, the shear loads generated by its self-weight of mortar will make the shear stress increase, affecting the safety of structure. Since the on-site mixed plastering mortar can only take control of raw materials and roughly of mortar proportion, therefore, it is relatively easy to have quality problems; however, ready-mixed plastering mortar will not be easy to have quality problems due to its industrialized production.
If you need any
PRODUCTION FORMULATIONS and PRODUCTION PROCESS
about
PRODUCTION FORMULATIONS and PRODUCTION PROCESS
about
CONSTRUCTION CHEMICALS
CONSTRUCTION CHEMICALS
FORMULATIONS
ENCYCLOPEDİA - 1
is enough.
Construction chemicals formulations encyclopedia - 1 contains tile and seramic adhesive formulations, production process ofcement based flexible tile and seramic adhesives, making rapid set and cement based tile and ceramic adhesive, grey and white tile and ceramic adhesive formulas, composition ofcement based marble and granite adhesive, manufacturing process of mortar grout ( joint filler ), cement based and polymer added joint fillerformulations, production of color mortar grouts,stamped concrete release powder production process, making stamped concrete colored hardener, formulation of thermal insulation coating plaster, cement based white and grey thermal insulating coating plaster manufacturing process, cement based waterproof coating plaster production process, cement based thermal insulating screed plaster composition, preparation of cement based heat insulation plate mortar, manufacturing process of cement based heat coating insulation plate adhesive mortar, formulations of satin plaster, making cement based and rapid set waterplug, formulations of cement based thick repair mortar,manufacturing process of black patching and reparing paste, making enjection mortar, formula ofkhorasan mortar, production process of hydraulic lime mortar, making gaseous concrete bonding ( adhesive ) mortar, composition and compound of cement based decorative plaster, formulations of plastic paint powder.
All construction chemicals in the encyclopedia are producible easily. You need no help and no technıcal support. The encyclopedia is enough to produce cement based adhesives, joint filler, plaster and mortar itself.
CONSTRUCTION CHEMICALS
FORMULATIONS
ENCYCLOPEDIA - 1
is written clear and understandable.
|
|
|