Aqueous solutions of glutaraldehyde at 10-50% are used for the treatment of water in cooling towers, air washers and other water recirculating systems to prevent corrosion and the build-up of microbial growth.
The solution is administered in slugs as shock kill doses, either manually or by use of automatic dosing equipment, to give 50-100 ppm glutaraldehyde in treated water. Glutaraldehyde is used significantly in off-shore operations.
A 15-50% aqueous concentrate is added to well injection sea water to prevent the growth of sulfate reducing bacteria which cause metal corrosion. The solution is administered in slugs by automatic pumping system to give 100-300 ppm in water.
GLUTARALDEHYDE DISINFECTANTS
AND
PRODUCTION PROCESS
AND
PRODUCTION PROCESS
MANUFACTURING PROCESS OF GLUTARALDEHYDE DISINFECTANTS is not very complicated. For the production, there is need usable and tried a formulation, raw materials and mixing tank. For raw materials to be used, quantities to be used and ingredients usage rankings, you should look into this formulation. Therefore, formulation and productıon methods of glutaraldehyde disinfectant solutions are important. If you have not a good formulation, you cannot make healthy and efficient production of any disinfectant products and derivatives.
DISINFECTANT PRODUCTS FORMULATIONS ENCYCLOPEDIA
|
|
|