ORTHO PHTHALALDEHYDE solution is a clear which typically contains 0.55% OPA. OPA has demonstrated excellent microbiocidal activity in in vitro studies . For example, it has shown superior mycobactericidal activity (5-log10 reduction in 5 minutes) compared with glutaraldehyde. The mean time required to effect a 6-log10 reduction for M. bovis using 0.21% OPA was 6 minutes, compared with 32 minutes using 1.5% glutaraldehyde. When tested against a wide range of microorganisms, including glutaraldehyde-resistant mycobacteria and Bacillus subtilis spores.
ORTHO PHTHALALDEHYDE showed good activity against the mycobacteria tested, including the glutaraldehyde-resistant strains, but 0.5% OPA was not sporicidal within 270 minutes of exposure. Increasing the pH from its unadjusted level (about 6.5) to pH 8 improved sporicidal activity.
DISINFECTANTS AND PRODUCTION PROCESS
MANUFACTURING PROCESS OF ORTHO PHTHALALDEHYDE DISINFECTANTS is not very complicated. For the production, there is need usable and tried a formulation, raw materials and mixing tank. For raw materials to be used, quantities to be used and ingredients usage rankings, you should look into this formulation. Therefore, formulation and productıon methods of ortho phtalaldehyde disinfectant solutions are important. If you have not a good formulation, you cannot make healthy and efficient production of any disinfectant products and derivatives.
DISINFECTANT PRODUCTS FORMULATIONS ENCYCLOPEDIA
|
|
|