pH pool water problems
Pool water problem - pH
pH balance in swimming pools is possibly the most critical element of pool water maintenance. If you consider that chlorine's ability to do its job is directly linked to the pH, high or low levels inevitably lead to sanitization problems.
The ideal range for pH in swimming pool water is 7.0 - 7.6 . The pH of our eyes is typically 7.2 - 7.4 . In our experience, if the pH is kept at the same level as that in our eyes, the side-effects of burning red eyes is kept to a minimum. The ability of chlorine to disinfect at this level is also optimum.
High pH in swimming pool water
High pH in swimming pool water may result in one or more of the following problems:
- scaling or calcium buildup on pool surfaces, waterline and accessories;
- dull or cloudy pool water;
- clogging of filter medium or elements;
- drop in disinfection potential of chlorine resulting in algae growth;
- burning eyes and nose;
- dry, itchy skin and scalp.
Lower the high pH in pool water
Adding an acid to the pool water reduces the pH. The most common chemicals used to reduce high pool water pH are:
- muriatic acid - typically 30% - 35% liquid hydrochloric acid;
- sodium bisulfate - granule or powder pH reducer, dry acid.
Other acids that have been used in pool water are:
- sulfuric acid - raises TDS levels & adds sulfates to the pool water;
- nitric acid - highly corrosive but is known to work well.
If the Total alkalinity of the pool water is within the recommended parameters of 80 - 120ppm, pH reducer should be added according to the instructions on the container. The acid should usually be added to water and mixed before dosing the pool. The pump should be running when the acid is slowly distributed around the pool.
Low pH in swimming pool water
Low pH in swimming pool water may cause one or more of these problems:
- eroding of the pool plaster or grouting;
- corroding of the metal pool accessories (steps, heater . . .);
- staining resulting from metal corrosion;
- rapid dissipation of chlorine requiring increased dosage;
- burning eyes and nose;
- dry and itchy skin and scalp;
- perishing of swimwear, pool toys and accessories.
Raise the low pH in pool water
Adding a base or alkali raises the pH of the pool water. If the Total alkalinity is normal, pH increaser should be added according to the instructions on the container. The active ingredient is usually sodium carbonate.
Often low pH is a result of acid rain and occurs after periods of heavy precipitation. The normal tendency of pool water pH is to rise through exposure to wind, sunshine and bathers.
The most common cause of consistently low pH is low Total alkalinity, which should always be adjusted (with sodium bicarbonate) before trying to increase the pH.
FORMULATIONS
AND
MANUFACTURING PROCESS
PRODUCTION OF SWIMMING POOL PH REDUCER is not very complicated. For the production, there is need usable and tried a formulation, raw materials and mixing tank. For raw materials to be used, quantities to be used and ingredients usage rankings, you should decide to look into this formulation. Therefore, formulation and productıon methods of pH reducer in swimming pools is important. If you have not a good formulation, you cannot make healthy and efficient production of any pH reducer in pool.
pH Reducer
In Swimming Pool
INDUSTRIAL PRODUCTS
FORMULATIONS
ENCYCLOPEDİA - 2
is enough.
This encyclopedia has many formulations of foamed concrete agents formulation and making methods,lightweight concrete liquid agent production, powder agents,foamed concrete gel agents making, preparation of lightweight concrete solutions,foamed concrete crack preventive agents formulas, drilling foam agent manufacturing process,disco foam agents productions, disco fog fluid formulations, disco scented fog juice formulations,gas leak detection products making, trucks and trailer foam cleaning agent formulas and production process, train and bus foam cleaner formulas,heavy duty marine cleaning products making, rust remover agents formulations,limescale remover and cleaner agents productions, corrosion prevent agents making.fluid greases production and formula,tar and pitch remover products,acrylic paint remover, cellolose paint remover productions,synthetic paint stripper formulations,polyurethane and epoxy paint stripper formulas,electrostatic powder paint remover manufacturing process, acidic paint remover,alkaline paint remover,varnish and paint remover productions, synthetic and cellulose thinner production processes, salt water corrosion inhibitor making, fan cleaning foam agent making, air conditioning cleaner and disinfectant products, water treatment chemicals, pool swimming chemicals and etc production process.
All industrial products in the encyclopedia are producible easily. You need no help and no technıcal support. The encyclopedia is enough to produce pool disinfectants itself.
INDUSTRIAL PRODUCTS
FORMULATIONS
ENCYCLOPEDIA - 2
is written clear and understandable.
|
|
|