The American Petroleum Institute (API) has established standards for the gelation index in motor oils. In most cases, the maximum acceptable gelation index is 12, with a maximum viscosity of 40,000 centipoise. There is a certain point when an oil simply can’t be pumped due to either gelation or to viscosity that is too high. When viscosity increases, a limited flow condition can occur. This is when the volume of oil being pulled through the pump is lower than what is needed to adequately lubricate the motor. 


If the oil gels or the viscosity becomes too high, it can lead to another condition known as air binding. In this condition, an air void is created within the oil in the sump. The oil is too thick to fill the void, and thus the pump just pulls in air. This adversely affects the health of the equipment, as it can lead to boundary conditions, excessive wear and ultimately premature failure. 


Other methods can also be used to test an oil’s cold-temperature characteristics. ASTM D3829 is the standard test method for predicting the borderline pumping temperature of engine oil. With this test, the goal is to identify the temperature at which an engine oil can no longer be pumped. The test results can indicate whether a candidate oil remains fluid enough at certain temperatures or if a different oil should be selected.

 

 

MANUFACTURING PROCESS OF ENGINE OIL is not very complicated. For the production, there is need usable and tried a formulation, ingredients ( performance and another additives, base oils,foam agent, pour point depressant, etc. ) and process tank. For ingredients to be used, quantities to be used and ingredients usage rankings, you should look into this formulation and manufacturing process. Therefore, formulation and productıon process of MULTIGRADE, MONOGRADE,SYNTHETIC,SEMI SYNTHETIC MOTOR OIL are important. If you have not a good formulation, you cannot make healthy and  efficient production of any lubricating oils.
 

 

If you need any manufacturing formulations and production methods about
 

any engine oil 


LUBRICATING OIL

FORMULATIONS

ENCYCLOPEDİA

is enough.

LUBRICATING OIL FORMULATION ENCYCLOPEDIA has many formulations of greases, complex grease, lithium grease production,sodium greases formula, formulation,multigrade engine oils manufacturing process,motor oils making, gear oil production, synthetic engine oils,semi synthetic motor oils,gasoline oils,diesel oils production process,composition of turbine oils,transmission oil manufacturing, production of cycle motor engine, tractor oils,mineral based motor engine production,heat transfer oils, slideway oils formulation, formulations, cutting oils formula,formulas grinding oils,mould oils manufacturing process and etc.


All lubricating oils in the encyclopedia are producible easily.You need no help and no technıcal support. The encyclopedia is enough to produce lubricating oils and engine oils  itself.

LUBRICATING OIL

FORMULATIONS

ENCYCLOPEDIA

is written clear and understandable.

DETERGENT ENCYCLOPEDIAS AND CONTENTS

 

 

 
HARD BOOK                                         E BOOK





RELATED TAGS: What is engine oils,making synthetic diesel engine oil,semi synthetic engine oil manufacturing process,mineral based engine oil production, heavy duty engine oil formulation,high performance engine oil formula,formulas,properties of motor oils,synthetic motor oil msds, analysis,composition of engine oils,additives of motor oils, mineral engine oil formulation,make semi synthetic diesel engine oil, base oils,synthetic base oils,light neutral oil,heavy neutral oil,performance additives package, properties of diesel engine oil, how to formulate engine oils, types of engine oils, synthetic motor oils,ingredients of engine oils,compounds of engine oils, index of motor oil,characteristic of motor oils,application of motor oils,combination of synthetic engine oils.




SOLVERCHEM PUBLICATIONS