Consequently, the need arose to develop a high shear rate viscometer to reflect the viscosity in engines under operating temperatures. In the early 1980s, an instrument and a technique were developed that could reach several million reciprocal seconds at 150 degrees C as well as exert high shear rates at other temperatures on both fresh and used engine oils. The instrument was called the tapered bearing simulator viscometer.



The technique was accepted by ASTM as test method D4683 for use at 150 degrees C (and more recently as D6616 for use at 100 degrees C). This critical bench test of engine oil quality became known as high temperature, high shear rate (HTHS) viscosity. Minimum limits were then imposed for various grades in the SAE viscosity classification system. 


Interestingly, it was later shown that this instrument was unique and basically absolute in providing measures of both shearing torque or shear stress and shear rate while operating. It is the only known viscometer capable of doing this.


 

MANUFACTURING PROCESS OF ENGINE OIL is not very complicated. For the production, there is need usable and tried a formulation, ingredients ( performance and another additives, base oils,foam agent, pour point depressant, etc. ) and process tank. For ingredients to be used, quantities to be used and ingredients usage rankings, you should look into this formulation and manufacturing process. Therefore, formulation and productıon process of MULTIGRADE, MONOGRADE,SYNTHETIC,SEMI SYNTHETIC MOTOR OIL are important. If you have not a good formulation, you cannot make healthy and  efficient production of any lubricating oils.
 

 

If you need any manufacturing formulations and production methods about
 

any engine oil 


LUBRICATING OIL

FORMULATIONS

ENCYCLOPEDİA

is enough.

LUBRICATING OIL FORMULATION ENCYCLOPEDIA has many formulations of greases, complex grease, lithium grease production,sodium greases formula, formulation,multigrade engine oils manufacturing process,motor oils making, gear oil production, synthetic engine oils,semi synthetic motor oils,gasoline oils,diesel oils production process,composition of turbine oils,transmission oil manufacturing, production of cycle motor engine, tractor oils,mineral based motor engine production,heat transfer oils, slideway oils formulation, formulations, cutting oils formula,formulas grinding oils,mould oils manufacturing process and etc.


All lubricating oils in the encyclopedia are producible easily.You need no help and no technıcal support. The encyclopedia is enough to produce lubricating oils and engine oils  itself.

LUBRICATING OIL

FORMULATIONS

ENCYCLOPEDIA

is written clear and understandable.

DETERGENT ENCYCLOPEDIAS AND CONTENTS

 

 

 
HARD BOOK                                         E BOOK





RELATED TAGS: What is engine oils,making synthetic diesel engine oil,semi synthetic engine oil manufacturing process,mineral based engine oil production, heavy duty engine oil formulation,high performance engine oil formula,formulas,properties of motor oils,synthetic motor oil msds, analysis,composition of engine oils,additives of motor oils, mineral engine oil formulation,make semi synthetic diesel engine oil, base oils,synthetic base oils,light neutral oil,heavy neutral oil,performance additives package, properties of diesel engine oil, how to formulate engine oils, types of engine oils, synthetic motor oils,ingredients of engine oils,compounds of engine oils, index of motor oil,characteristic of motor oils,application of motor oils,combination of synthetic engine oils.


SOLVERCHEM PUBLICATIONS