WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS
WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS
WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS
PART A

SHORT OIL ALKYD RESIN

BENTONITE

CALCIUM OCTOATE ( % 4 )

TITANIUM DIOXIDE

CHLORINATED RUBBER RESIN ( % 4 )

CALCITE ( 5 MICRON )

TOLUENE


PART B

SHORT OIL ALKYD RESIN

LEAD OCTOATE ( % 24 )

COBALT OCTOATE ( % 6 )

METHYL ETHYL KETONE ( MEK )



15

0.40

0.50

18

6

33.30

10




15

1

0.50

0.30

WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS


WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS

Charge all ingredients of part A in the process tank. Start to stirr at 700 – 750 high speed. Then, The mixture is passed through the cylinders for homogenous mixing. Add all ingedients of part B during same high speed mixing. Continue to mix until homogenous. Homogenous is enough, process is completed.


NOTE: In the above manufacturing process, the amounts of all ingredients can be changed depending on condition of market.
 
 


WHITE PAVING STONE PAINT FORMULATION AND PRODUCTION PROCESS

ABOVE FORMULATIONS ARE TAKEN FROM BELOW

INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA - 1 


 
 
INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA 1INDUSTRIAL PAINTS FORMULATIONS ENCYCLOPEDIA 1
 
                         

HARD BOOK                                   E-BOOK